bearhawkproject.com Matt Kunkel's Bearhawk Build Log

30Sep/101 hr

Bent T25 ribs and Rudder fabric attach channel

I bent up 2 additional T25 ribs that I intend to weld in place to help retain the counterweight.  I don't like the idea of screwing through the structure per the instructions so this is an alternative shown in the scratch builder guides.  I also bent up a channel to be welded between the rudder horn and the lowermost tube to provide a fabric attachment location.  .032 4130 was used.

Filed under: Fuselage Leave a comment
Comments (0) Trackbacks (0)

No comments yet.


Leave a Reply

No trackbacks yet.