bearhawkproject.com Matt Kunkel's Bearhawk Build Log

1Jun/102 hrs

Began match drilling floors

After laying the floors into their locations, I placed weights and milk jugs full of cleco's on them to help them flatten out.  I adjusted each floorboard so it's centered on the tubes and has proper edge distances on the end holes.  I clamped each floorboard in place and drilled them one at a time securing each hole with a cleco.  Drilling began in the middle and systematically worked out alternating holes to eliminate any slack.  Serhat, a friend from work came to the hangar and poked cleco's in holes as I drilled them.

Filed under: Fuselage Leave a comment
Comments (0) Trackbacks (0)

No comments yet.


Leave a Reply

No trackbacks yet.